Amana Dishwasher Not Drying: Troubleshooting and Fixes

Wondering why you keep finding your Amana dishwasher not drying properly? If your dishwasher isn’t drying and you’re tired of reaching for a dish towel to finish the job your dishwasher should be doing, then you’re in the right place! We’ll delve into the potential causes of this frustrating problem, as well as share tips and tricks for getting your Amana dishwasher back to delivering sparkling clean and perfectly dry dishes. 

Tips and Tricks For an Amana Dishwasher Not Drying

Say goodbye to damp dishware and hello to a more efficient kitchen experience with this troubleshooting guide!

Verify Proper Loading and Cycle Selection

Improper loading or selecting the wrong cycle can contribute to an Amana dishwasher not drying. By ensuring correct loading and cycle selection, you can optimize drying performance.

1. Load dishes properly, avoiding overcrowding or nesting, which can prevent proper air circulation. If your dishes aren’t getting cleaned either this may be the problem.
2. Ensure plastic items are placed in the top rack, as they may not dry as effectively as glass or ceramic items.
3. Use the appropriate cycle for the type of dishes being washed. Some Amana dishwashers offer a “heated dry” or “high-temperature wash” option, which can improve drying performance.

A Faulty Heating Element

One of the primary reasons your Amana dishwasher leaves dishes wet is a faulty Amana dishwasher heating element. The heating element is responsible for heating the air and water in the dishwasher to dry the dishes. If it’s not working correctly, your dishes will remain wet after the cycle.

1. Turn off the dishwasher and unplug it from the power source.
2. Open the dishwasher and locate the heating element (usually at the bottom).
3. Check for visible damage, such as cracks or breaks. If you find any, replace the heating element.
4. If there’s no visible damage, a professional can use a multimeter to test the element’s continuity. The heating element must be replaced if the multimeter doesn’t show continuity.

Inspect the Rinse Aid Dispenser

Another common reason for an Amana dishwasher not drying dishes is an empty or malfunctioning rinse aid dispenser. Rinse aid helps to prevent water spots and improve drying performance by reducing the surface tension of water, allowing it to sheet off the dishes more easily.

1. Check the rinse aid dispenser and ensure it’s filled with rinse aid.
2. Inspect the dispenser for any signs of clogging or damage. If you find your Amana dishwasher not using jet dry you may need to clean or replace it if necessary.
3. If your dishwasher has adjustable rinse aid settings, try increasing the amount dispensed during each cycle.

Verify Proper Loading and Cycle Selection

Improper loading or selecting the wrong cycle can also contribute to wet dishes. By ensuring correct loading and cycle selection, you can optimize drying performance. Load dishes properly, avoiding overcrowding or nesting, which can prevent proper air circulation.

1. Ensure plastic items are placed in the top rack, as they may not dry as effectively as glass or ceramic items.
2. Use the appropriate cycle for the type of dishes being washed. Some Amana dishwashers offer a “heated dry” or “high-temperature wash” option, which can improve drying performance.

Maintain Proper Ventilation

Inadequate ventilation within the dishwasher can cause moisture to remain, resulting in dishes coming out wet. Wondering “where is the vent on my Amana dishwasher”? Usually, they’re located on the top left side. We’d also recommend checking the drain filter, because if the water isn’t draining , your dishes will be less likely to get dry. To maintain proper ventilation:

1. Ensure the dishwasher door is properly aligned and sealed. Adjust or replace the door gasket if needed.
2. Check the vent assembly for clogs or obstructions and clean it as necessary. 
3. Check and clean out the drain filter.
4. Confirm that the fan motor is operating correctly. If it’s not, it may need to be replaced.

By following these tips, you can quickly and effectively address the common issue of an Amana dishwasher not drying. Regular maintenance and proper usage will ensure that your Amana dishwasher continues to provide top-notch performance, leaving you with clean and dry dishes every time. And for any issues you can’t fix yourself, you can call the appliance service experts at Lake Appliance!